Ustaw w porządku malejącym
strona po stronie

578

FILTER
  • Łożysko igiełkowe
    S.138407

    Łożysko igiełkowe

    Średn. Wewn.: 45mmŚredn. Zewn.: 52mmSzerokość: 20mm
  • Łożysko igiełkowe
    S.138406

    Łożysko igiełkowe

    Średn. Wewn.: 35mmŚredn. Zewn.: 42mmSzerokość: 20mm
  • Łożysko igiełkowe
    S.138206

    Łożysko igiełkowe

    Średn. Wewn.: 25mmŚredn. Zewn.: 35mmSzerokość: 40mm
  • NTN SNR  120-180mm Ø
    S.153983

    NTN SNR 120-180mm Ø

    APPLICATIONS NTN-SNR adjustable spanners enable the safe and effortless tightening and loosening of all KM, KML and KMK type nuts and also B, TB, BR and TBR precision nuts.They avoid any damage to the nuts or the shaft. ADVANTAGES Made of special tempered steel, these spanners are extremely strong.The joint with its spring washer guarantees gentle reliable operation.The laser-etched imprint makes them easily and permanently identifiable.The hole in the handle makes them easy to store.
  • NTN SNR  120-180mm Ø
    S.153979

    NTN SNR 120-180mm Ø

    APPLICATIONS NTN-SNR adjustable spanners enable the safe and effortless tightening and loosening of all KM, KML and KMK type nuts and also B, TB, BR and TBR precision nuts.They avoid any damage to the nuts or the shaft. ADVANTAGES Made of special tempered steel, these spanners are extremely strong.The joint with its spring washer guarantees gentle reliable operation.The laser-etched imprint makes them easily and permanently identifiable.The hole in the handle makes them easy to store.
  • NTN SNR  12T
    S.154002

    NTN SNR 12T

    The self-centering device facilitates positioning and anchoring around the bearing. The power developed by the hydraulic system allows the part to be extracted safely with very little effort.PracticalReady-to-use in a strong case. No assembly of the jaws required before use.Compact: the hydraulic pump is built-in. No need for a separate pump, hose or spindle.Ergonomic: pump handle pivoting through 360°, allowing the extractor to be used in the most comfortable position.Telescopic, it provides optimum transmission of the effort.Easy centering of the piston on the shaft with retractable, integrated point.A piston extension is supplied for use with a remote support surface.A piston return device makes it ready immediately for further use.Long stroke of hydraulic spindle facilitates dismounting in one operation.Possibility to change between two or three jaws, depending on the accessibility of the bearing.
  • NTN SNR  12T
    S.154009

    NTN SNR 12T

    APPLICATIONS The tri-section pulling plate is the complementary tool to the three-armed pullers when the latter does not have sufficient grip. Universal, it is suitable for both the SCHP hydraulic extractor and the SCMP mechanical model. ADVANTAGES The blades are placed behind the bearing, where the extraction force is most effective.The application of the effort on the inner ring minimises the risk of damaging the bearing while preserving the rolling body and the outer ring.The tri-section construction distributes the extraction force evenly, preventing the bearing from locking and/or tilting on the shaft during dismounting.
  • NTN SNR  15-35mm Ø
    S.153984

    NTN SNR 15-35mm Ø

    APPLICATIONS NTN-SNR adjustable spanners enable the safe and effortless tightening and loosening of all KM, KML and KMK type nuts and also B, TB, BR and TBR precision nuts.They avoid any damage to the nuts or the shaft. ADVANTAGES Made of special tempered steel, these spanners are extremely strong.The joint with its spring washer guarantees gentle reliable operation.The laser-etched imprint makes them easily and permanently identifiable.The hole in the handle makes them easy to store.
  • NTN SNR  20T
    S.154003

    NTN SNR 20T

    The self-centering device facilitates positioning and anchoring around the bearing. The power developed by the hydraulic system allows the part to be extracted safely with very little effort.PracticalReady-to-use in a strong case. No assembly of the jaws required before use.Compact: the hydraulic pump is built-in. No need for a separate pump, hose or spindle.Ergonomic: pump handle pivoting through 360°, allowing the extractor to be used in the most comfortable position.Telescopic, it provides optimum transmission of the effort.Easy centering of the piston on the shaft with retractable, integrated point.A piston extension is supplied for use with a remote support surface.A piston return device makes it ready immediately for further use.Long stroke of hydraulic spindle facilitates dismounting in one operation.Possibility to change between two or three jaws, depending on the accessibility of the bearing.
  • NTN SNR  2T
    S.153998

    NTN SNR 2T

    APPLICATIONS Is also well suited to removing pulleys, toothed wheels, flywheels fixed to a shaft.ADVANTAGES PracticalThe self-centering mechanism ensures the simultaneous positioning of the puller’s arms on the bearing.Compact and ergonomic, it may be easily operated in every position by one person. SafeSelf-locking system prevents the arms from bending or slipping.The greater the extraction force, the tighter the jaws grip the part.Robust, designed in hardened steel for maximum strength. Multiple usesQuickly convertible to two or three claws, depending on the space available.
  • NTN SNR  30T
    S.154004

    NTN SNR 30T

    The self-centering device facilitates positioning and anchoring around the bearing. The power developed by the hydraulic system allows the part to be extracted safely with very little effort.PracticalReady-to-use in a strong case. No assembly of the jaws required before use.Compact: the hydraulic pump is built-in. No need for a separate pump, hose or spindle.Ergonomic: pump handle pivoting through 360°, allowing the extractor to be used in the most comfortable position.Telescopic, it provides optimum transmission of the effort.Easy centering of the piston on the shaft with retractable, integrated point.A piston extension is supplied for use with a remote support surface.A piston return device makes it ready immediately for further use.Long stroke of hydraulic spindle facilitates dismounting in one operation.Possibility to change between two or three jaws, depending on the accessibility of the bearing.
  • NTN SNR  30T
    S.154010

    NTN SNR 30T

    APPLICATIONS The tri-section pulling plate is the complementary tool to the three-armed pullers when the latter does not have sufficient grip. Universal, it is suitable for both the SCHP hydraulic extractor and the SCMP mechanical model. ADVANTAGES The blades are placed behind the bearing, where the extraction force is most effective.The application of the effort on the inner ring minimises the risk of damaging the bearing while preserving the rolling body and the outer ring.The tri-section construction distributes the extraction force evenly, preventing the bearing from locking and/or tilting on the shaft during dismounting.
  • NTN SNR  35-50mm Ø
    S.153985

    NTN SNR 35-50mm Ø

    APPLICATIONS NTN-SNR adjustable spanners enable the safe and effortless tightening and loosening of all KM, KML and KMK type nuts and also B, TB, BR and TBR precision nuts.They avoid any damage to the nuts or the shaft. ADVANTAGES Made of special tempered steel, these spanners are extremely strong.The joint with its spring washer guarantees gentle reliable operation.The laser-etched imprint makes them easily and permanently identifiable.The hole in the handle makes them easy to store.
  • NTN SNR  35-50mm Ø
    S.153980

    NTN SNR 35-50mm Ø

    APPLICATIONS NTN-SNR adjustable spanners enable the safe and effortless tightening and loosening of all KM, KML and KMK type nuts and also B, TB, BR and TBR precision nuts.They avoid any damage to the nuts or the shaft. ADVANTAGES Made of special tempered steel, these spanners are extremely strong.The joint with its spring washer guarantees gentle reliable operation.The laser-etched imprint makes them easily and permanently identifiable.The hole in the handle makes them easy to store.
  • NTN SNR  3T
    S.153999

    NTN SNR 3T

    APPLICATIONS Is also well suited to removing pulleys, toothed wheels, flywheels fixed to a shaft.ADVANTAGES PracticalThe self-centering mechanism ensures the simultaneous positioning of the puller’s arms on the bearing.Compact and ergonomic, it may be easily operated in every position by one person. SafeSelf-locking system prevents the arms from bending or slipping.The greater the extraction force, the tighter the jaws grip the part.Robust, designed in hardened steel for maximum strength. Multiple usesQuickly convertible to two or three claws, depending on the space available.
  • NTN SNR  4T
    S.154007

    NTN SNR 4T

    APPLICATIONS The tri-section pulling plate is the complementary tool to the three-armed pullers when the latter does not have sufficient grip. Universal, it is suitable for both the SCHP hydraulic extractor and the SCMP mechanical model. ADVANTAGES The blades are placed behind the bearing, where the extraction force is most effective.The application of the effort on the inner ring minimises the risk of damaging the bearing while preserving the rolling body and the outer ring.The tri-section construction distributes the extraction force evenly, preventing the bearing from locking and/or tilting on the shaft during dismounting.
  • NTN SNR  4T
    S.154001

    NTN SNR 4T

    The self-centering device facilitates positioning and anchoring around the bearing. The power developed by the hydraulic system allows the part to be extracted safely with very little effort.Practical• Ready-to-use in a strong case. No assembly of the jaws required before use.• Compact: the hydraulic pump is built-in. No need for a separate pump, hose or spindle.• Ergonomic: pump handle pivoting through 360°, allowing the extractor to be used in the most comfortable position.• Telescopic, it provides optimum transmission of the effort.• Easy centering of the piston on the shaft with retractable, integrated point.• A piston extension is supplied for use with a remote support surface.• A piston return device makes it ready immediately for further use.• Long stroke of hydraulic spindle facilitates dismounting in one operation.• Possibility to change between two or three jaws, depending on the accessibility of the bearing.
  • NTN SNR  50-80mm Ø
    S.153986

    NTN SNR 50-80mm Ø

    APPLICATIONS NTN-SNR adjustable spanners enable the safe and effortless tightening and loosening of all KM, KML and KMK type nuts and also B, TB, BR and TBR precision nuts.They avoid any damage to the nuts or the shaft. ADVANTAGES Made of special tempered steel, these spanners are extremely strong.The joint with its spring washer guarantees gentle reliable operation.The laser-etched imprint makes them easily and permanently identifiable.The hole in the handle makes them easy to store.
  • NTN SNR  50-80mm Ø
    S.153981

    NTN SNR 50-80mm Ø

    APPLICATIONS NTN-SNR adjustable spanners enable the safe and effortless tightening and loosening of all KM, KML and KMK type nuts and also B, TB, BR and TBR precision nuts.They avoid any damage to the nuts or the shaft. ADVANTAGES Made of special tempered steel, these spanners are extremely strong.The joint with its spring washer guarantees gentle reliable operation.The laser-etched imprint makes them easily and permanently identifiable.The hole in the handle makes them easy to store.
  • NTN SNR  5T
    S.154000

    NTN SNR 5T

    APPLICATIONS Is also well suited to removing pulleys, toothed wheels, flywheels fixed to a shaft.ADVANTAGES PracticalThe self-centering mechanism ensures the simultaneous positioning of the puller’s arms on the bearing.Compact and ergonomic, it may be easily operated in every position by one person. SafeSelf-locking system prevents the arms from bending or slipping.The greater the extraction force, the tighter the jaws grip the part.Robust, designed in hardened steel for maximum strength. Multiple usesQuickly convertible to two or three claws, depending on the space available.
  • NTN SNR  80-120mm Ø
    S.153987

    NTN SNR 80-120mm Ø

    APPLICATIONS NTN-SNR adjustable spanners enable the safe and effortless tightening and loosening of all KM, KML and KMK type nuts and also B, TB, BR and TBR precision nuts.They avoid any damage to the nuts or the shaft. ADVANTAGES Made of special tempered steel, these spanners are extremely strong.The joint with its spring washer guarantees gentle reliable operation.The laser-etched imprint makes them easily and permanently identifiable.The hole in the handle makes them easy to store.
  • NTN SNR  80-120mm Ø
    S.153982

    NTN SNR 80-120mm Ø

    APPLICATIONS NTN-SNR adjustable spanners enable the safe and effortless tightening and loosening of all KM, KML and KMK type nuts and also B, TB, BR and TBR precision nuts.They avoid any damage to the nuts or the shaft. ADVANTAGES Made of special tempered steel, these spanners are extremely strong.The joint with its spring washer guarantees gentle reliable operation.The laser-etched imprint makes them easily and permanently identifiable.The hole in the handle makes them easy to store.
  • NTN SNR  8T
    S.154008

    NTN SNR 8T

    APPLICATIONS The tri-section pulling plate is the complementary tool to the three-armed pullers when the latter does not have sufficient grip. Universal, it is suitable for both the SCHP hydraulic extractor and the SCMP mechanical model. ADVANTAGES The blades are placed behind the bearing, where the extraction force is most effective.The application of the effort on the inner ring minimises the risk of damaging the bearing while preserving the rolling body and the outer ring.The tri-section construction distributes the extraction force evenly, preventing the bearing from locking and/or tilting on the shaft during dismounting.
  • NTN SNR  IFT SET 33
    S.153978

    NTN SNR IFT SET 33

    Tuleje montażowe Zakres średnic [mm] 10-50 Zakres średnic [mm] 26-110 Zawiera 33 pierścienie Zawiera 3 szt. aluminiowych tulei Zawiera młotek
  • NTN SNR Łożyska baryłkowe (21306V)
    S.138420

    NTN SNR Łożyska baryłkowe (21306V)

    Średn. Wewn.: 30mmŚredn. Zewn.: 72mmSzerokość: 19mm
  • NTN SNR Łożyska baryłkowe (21309EAW33)
    S.138421

    NTN SNR Łożyska baryłkowe (21309EAW33)

    Średn. Wewn.: 45mmŚredn. Zewn.: 100mmSzerokość: 25mm
  • NTN SNR Łożyska baryłkowe (21313D1)
    S.138423

    NTN SNR Łożyska baryłkowe (21313D1)

    Średn. Wewn.: 65mmŚredn. Zewn.: 140mmSzerokość: 33mm
  • NTN SNR Łożyska baryłkowe (22206EAW33)
    S.138424

    NTN SNR Łożyska baryłkowe (22206EAW33)

    Średn. Wewn.: 30mmŚredn. Zewn.: 62mmSzerokość: 20mm
  • NTN SNR Łożyska baryłkowe (22207EAW33)
    S.138425

    NTN SNR Łożyska baryłkowe (22207EAW33)

    Średn. Wewn.: 35mmŚredn. Zewn.: 72mmSzerokość: 23mm
  • NTN SNR Łożyska baryłkowe (22208EAW33C3)
    S.138427

    NTN SNR Łożyska baryłkowe (22208EAW33C3)

    Średn. Wewn.: 40mmŚredn. Zewn.: 80mmSzerokość: 23mm
  • NTN SNR Łożyska baryłkowe (22210EAW33)
    S.138429

    NTN SNR Łożyska baryłkowe (22210EAW33)

    Średn. Wewn.: 50mmŚredn. Zewn.: 90mmSzerokość: 23mm
  • NTN SNR Łożyska baryłkowe (22210EAW33C3)
    S.138430

    NTN SNR Łożyska baryłkowe (22210EAW33C3)

    Średn. Wewn.: 50mmŚredn. Zewn.: 90mmSzerokość: 23mm
  • NTN SNR Łożyska baryłkowe (22211EAW33)
    S.138431

    NTN SNR Łożyska baryłkowe (22211EAW33)

    Średn. Wewn.: 55mmŚredn. Zewn.: 100mmSzerokość: 25mm
  • NTN SNR Łożyska baryłkowe (22213EAKW33)
    S.138434

    NTN SNR Łożyska baryłkowe (22213EAKW33)

    Średn. Wewn.: 65mmŚredn. Zewn.: 120mmSzerokość: 31mm
  • NTN SNR Łożyska baryłkowe (22213EAKW33C3)
    S.138353

    NTN SNR Łożyska baryłkowe (22213EAKW33C3)

    Średn. Wewn.: 65mmŚredn. Zewn.: 120mmSzerokość: 31mm
  • NTN SNR Łożyska baryłkowe (22213EAW33)
    S.138433

    NTN SNR Łożyska baryłkowe (22213EAW33)

    Średn. Wewn.: 65mmŚredn. Zewn.: 120mmSzerokość: 31mm
  • NTN SNR Łożyska baryłkowe (22214EAW33)
    S.138435

    NTN SNR Łożyska baryłkowe (22214EAW33)

    Średn. Wewn.: 70mmŚredn. Zewn.: 125mmSzerokość: 31mm
  • NTN SNR Łożyska baryłkowe (22217EAW33)
    S.138436

    NTN SNR Łożyska baryłkowe (22217EAW33)

    Średn. Wewn.: 85mmŚredn. Zewn.: 150mmSzerokość: 36mm
  • NTN SNR Łożyska baryłkowe (22310EAW33)
    S.138437

    NTN SNR Łożyska baryłkowe (22310EAW33)

    Średn. Wewn.: 50mmŚredn. Zewn.: 110mmSzerokość: 40mm
  • NTN SNR Łożyska baryłkowe (22312EAW33)
    S.138438

    NTN SNR Łożyska baryłkowe (22312EAW33)

    Średn. Wewn.: 60mmŚredn. Zewn.: 130mmSzerokość: 46mm
  • NTN SNR Łożyska baryłkowe (22317EAW33)
    S.138439

    NTN SNR Łożyska baryłkowe (22317EAW33)

    Średn. Wewn.: 85mmŚredn. Zewn.: 180mmSzerokość: 60mm
  • NTN SNR Łożyska baryłkowe (6209SEE)
    S.138215

    NTN SNR Łożyska baryłkowe (6209SEE)

    Średn. Wewn.: 45mmŚredn. Zewn.: 85mmSzerokość: 19mm
  • NTN SNR Łożyska baryłkowe (CS309LLU)
    S.138354

    NTN SNR Łożyska baryłkowe (CS309LLU)

    Średn. Wewn.: 45mmŚredn. Zewn.: 100mmSzerokość: 25mm
  • NTN SNR Łożyska kulkowe skośne (3207SC3)
    S.138177

    NTN SNR Łożyska kulkowe skośne (3207SC3)

    Średn. Wewn.: 35mmŚredn. Zewn.: 72mmSzerokość: 27mm
  • NTN SNR Łożyska kulkowe skośne (3306A)
    S.138184

    NTN SNR Łożyska kulkowe skośne (3306A)

    Średn. Wewn.: 30mmŚredn. Zewn.: 72mmSzerokość: 30.2mm
Ustaw w porządku malejącym
strona po stronie

578